sắt 3 oxit

This article is about a red-colored oxide of iron. For other uses, see Red Iron.

Iron(III) oxide or ferric oxide is the inorganic compound with the formula Fe2O3. It is one of the three main oxides of iron, the other two being iron(II) oxide (FeO), which is rare; and iron(II,III) oxide (Fe3O4), which also occurs naturally as the mineral magnetite. As the mineral known as hematite, Fe2O3 is the main source of iron for the steel industry. Fe2O3 is readily attacked by acids. Iron(III) oxide is often called rust, and to tướng some extent this label is useful, because rust shares several properties and has a similar composition; however, in chemistry, rust is considered an ill-defined material, described as Hydrous ferric oxide.[11]

Bạn đang xem: sắt 3 oxit

Iron(III) oxide
Haematite unit cell



Sample of iron(III) oxide
Pourbaix Diagram of aqueous Iron
IUPAC name

Iron(III) oxide

Other names

ferric oxide, haematite, ferric iron, red iron oxide, rouge, maghemite, colcothar, iron sesquioxide, rust, ochre


CAS Number

  • 1309-37-1 check

3D model (JSmol)

  • Interactive image
  • CHEBI:50819 check
  • 14147 ☒
ECHA InfoCard 100.013.790 Edit this at Wikidata
EC Number
  • 215-168-2
E number E172(ii) (colours)

Gmelin Reference

  • C19424 ☒

PubChem CID

  • 518696
RTECS number
  • NO7400000
  • 1K09F3G675 check

CompTox Dashboard (EPA)

  • DTXSID0029632 Edit this at Wikidata


  • InChI=1S/2Fe.3O check[inchi]


  • InChI=1/2Fe.3O/rFe2O3/c3-1-4-2(3)5-1



  • O1[Fe]2O[Fe]1O2


Chemical formula

Molar mass 159.687 g·mol−1
Appearance Red solid
Odor Odorless
Density 5.25 g/cm3[1]
Melting point 1,539 °C (2,802 °F; 1,812 K)[1]
105 °C (221 °F; 378 K)
β-dihydrate, decomposes
150 °C (302 °F; 423 K)
β-monohydrate, decomposes
50 °C (122 °F; 323 K)
α-dihydrate, decomposes
92 °C (198 °F; 365 K)
α-monohydrate, decomposes[3]

Solubility in water

Solubility Soluble in diluted acids,[1] barely soluble in sugar solution[2]
Trihydrate slightly soluble in aq. tartaric acid, citric acid, CH3COOH[3]

Magnetic susceptibility (χ)

+3586.0x10−6 cm3/mol

Refractive index (nD)

n1 = 2.91, n2 = 3.19 (α, hematite)[4]

Crystal structure

Rhombohedral, hR30 (α-form)[5]
Cubic bixbyite, cI80 (β-form)
Cubic spinel (γ-form)
Orthorhombic (ε-form)[6]

Space group

R3c, No. 161 (α-form)[5]
Ia3, No. 206 (β-form)
Pna21, No. 33 (ε-form)[6]

Point group

3m (α-form)[5]
2/m 3 (β-form)
mm2 (ε-form)[6]

Coordination geometry

Octahedral (Fe3+, α-form, β-form)[5]

Heat capacity (C)

103.9 J/mol·K[7]

Std molar
entropy (S298)

87.4 J/mol·K[7]

Std enthalpy of
formation fH298)

−824.2 kJ/mol[7]

Gibbs không tính phí energy fG)

−742.2 kJ/mol[7]
GHS labelling:


GHS07: Exclamation mark[8]

Signal word


Hazard statements

H315, H319, H335[8]

Precautionary statements

P261, P305+P351+P338[8]
NFPA 704 (fire diamond)

Threshold limit value (TLV)

5 mg/m3[1] (TWA)
Lethal dose or concentration (LD, LC):

LD50 (median dose)

10 g/kg (rats, oral)[10]
NIOSH (US health exposure limits):

PEL (Permissible)

TWA 10 mg/m3[9]

REL (Recommended)

TWA 5 mg/m3[9]

IDLH (Immediate danger)

2500 mg/m3[9]
Related compounds

Other anions

Iron(III) fluoride

Other cations

Manganese(III) oxide
Cobalt(III) oxide

Related iron oxides

Iron(II) oxide
Iron(II,III) oxide

Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).

☒ verify (what is check☒ ?)

Infobox references

Vial with iron(III) oxide
Iron(III) oxide in a vial

Structure Edit

Fe2O3 can be obtained in various polymorphs. In the main one, α, iron adopts octahedral coordination geometry. That is, each Fe center is bound to tướng six oxygen ligands. In the γ polymorph, some of the Fe sit on tetrahedral sites, with four oxygen ligands.

Alpha phase Edit

α-Fe2O3 has the rhombohedral, corundum (α-Al2O3) structure and is the most common size. It occurs naturally as the mineral hematite which is mined as the main ore of iron. It is antiferromagnetic below ~260 K (Morin transition temperature), and exhibits weak ferromagnetism between 260 K and the Néel temperature, 950 K.[12] It is easy to tướng prepare using both thermal decomposition and precipitation in the liquid phase. Its magnetic properties are dependent on many factors, e.g. pressure, particle size, and magnetic field intensity.

Gamma phase Edit

γ-Fe2O3 has a cubic structure. It is metastable and converted from the alpha phase at high temperatures. It occurs naturally as the mineral maghemite. It is ferromagnetic and finds application in recording tapes,[13] although ultrafine particles smaller kêu ca 10 nanometers are superparamagnetic. It can be prepared by thermal dehydratation of gamma iron(III) oxide-hydroxide. Another method involves the careful oxidation of iron(II,III) oxide (Fe3O4).[13] The ultrafine particles can be prepared by thermal decomposition of iron(III) oxalate.

Other solid phases Edit

Several other phases have been identified or claimed. The β-phase is cubic body-centered (space group Ia3), metastable, and at temperatures above 500 °C (930 °F) converts to tướng alpha phase. It can be prepared by reduction of hematite by carbon,[clarification needed] pyrolysis of iron(III) chloride solution, or thermal decomposition of iron(III) sulfate.[14]

The epsilon (ε) phase is rhombic, and shows properties intermediate between alpha and gamma, and may have useful magnetic properties applicable for purposes such as high mật độ trùng lặp từ khóa recording truyền thông media for big data storage.[15] Preparation of the pure epsilon phase has proven very challenging. Material with a high proportion of epsilon phase can be prepared by thermal transformation of the gamma phase. The epsilon phase is also metastable, transforming to tướng the alpha phase at between 500 and 750 °C (930 and 1,380 °F). It can also be prepared by oxidation of iron in an electric arc or by sol-gel precipitation from iron(III) nitrate.[citation needed] Research has revealed epsilon iron(III) oxide in ancient Chinese Jian ceramic glazes, which may provide insight into ways to tướng produce that size in the lab.[16][non-primary source needed]

Additionally, at high pressure an amorphous size is claimed.[6][non-primary source needed]

Liquid phase Edit

Molten Fe2O3 is expected to tướng have a coordination number of close to tướng 5 oxygen atoms about each iron atom, based on measurements of slightly oxygen deficient supercooled liquid iron oxide droplets, where supercooling circumvents the need for the high oxygen pressures required above the melting point to tướng maintain stoichiometry.[17]

Hydrated iron(III) oxides Edit

Several hydrates of Iron(III) oxide exist. When alkali is added to tướng solutions of soluble Fe(III) salts, a red-brown gelatinous precipitate forms. This is not Fe(OH)3, but Fe2O3·H2O (also written as Fe(O)OH). Several forms of the hydrated oxide of Fe(III) exist as well. The red lepidocrocite (γ-Fe(O)OH) occurs on the outside of rusticles, and the orange goethite (α-Fe(O)OH) occurs internally in rusticles. When Fe2O3·H2O is heated, it loses its water of hydration. Further heating at 1670 kelvin converts Fe2O3 to tướng thâm Fe3O4 (FeIIFeIII2O4), which is known as the mineral magnetite. Fe(O)OH is soluble in acids, giving [Fe(H2O)6]3+. In concentrated aqueous alkali, Fe2O3 gives [Fe(OH)6]3−.[13]

Reactions Edit

The most important reaction is its carbothermal reduction, which gives iron used in steel-making:

Fe2O3 + 3 CO → 2 Fe + 3 CO2

Another redox reaction is the extremely exothermic thermite reaction with aluminium.[18]

2 Al + Fe2O3 → 2 Fe + Al2O3

This process is used to tướng weld thick metals such as rails of train tracks by using a ceramic container to tướng funnel the molten iron in between two sections of rail. Thermite is also used in weapons and making small-scale cast-iron sculptures and tools.

Partial reduction with hydrogen at about 400 °C produces magnetite, a thâm magnetic material that contains both Fe(III) and Fe(II):[19]

3 Fe2O3 + H2 → 2 Fe3O4 + H2O

Iron(III) oxide is insoluble in water but dissolves readily in strong acid, e.g. hydrochloric and sulfuric acids. It also dissolves well in solutions of chelating agents such as EDTA and oxalic acid.

Heating iron(III) oxides with other metal oxides or carbonates yields materials known as ferrates (ferrate (III)):[19]

ZnO + Fe2O3 → Zn(FeO2)2

Preparation Edit

Iron(III) oxide is a product of the oxidation of iron. It can be prepared in the laboratory by electrolyzing a solution of sodium bicarbonate, an inert electrolyte, with an iron anode:

4 Fe + 3 O2 + 2 H2O → 4 FeO(OH)

The resulting hydrated iron(III) oxide, written here as FeO(OH), dehydrates around 200 °C.[19][20]

2 FeO(OH) → Fe2O3 + H2O

Uses Edit

Iron industry Edit

The overwhelming application of iron(III) oxide is as the feedstock of the steel and iron industries, e.g. the production of iron, steel, and many alloys.[20]

Polishing Edit

A very fine powder of ferric oxide is known as "jeweler's rouge", "red rouge", or simply rouge. It is used to tướng put the final polish on metallic jewelry and lenses, and historically as a cosmetic. Rouge cuts more slowly kêu ca some modern polishes, such as cerium(IV) oxide, but is still used in optics fabrication and by jewelers for the superior finish it can produce. When polishing gold, the rouge slightly stains the gold, which contributes to tướng the appearance of the finished piece. Rouge is sold as a powder, paste, laced on polishing cloths, or solid bar (with a wax or grease binder). Other polishing compounds are also often called "rouge", even when they bởi not contain iron oxide. Jewelers remove the residual rouge on jewelry by use of ultrasonic cleaning. Products sold as "stropping compound" are often applied to tướng a leather strop to tướng assist in getting a razor edge on knives, straight razors, or any other edged tool.

Pigment Edit

Two different colors at different hydrate phase (α: red, β: yellow) of iron(III) oxide hydrate;[3] they are useful as pigments.

Iron(III) oxide is also used as a pigment, under names "Pigment Brown 6", "Pigment Brown 7", and "Pigment Red 101".[21] Some of them, e.g. Pigment Red 101 and Pigment Brown 6, are approved by the US Food and Drug Administration (FDA) for use in cosmetics. Iron oxides are used as pigments in dental composites alongside titanium oxides.[22]

Hematite is the characteristic component of the Swedish paint color Falu red.

Xem thêm: soạn văn 10 bản hoà âm ngôn từ trong tiếng thu

Magnetic recording Edit

Iron(III) oxide was the most common magnetic particle used in all types of magnetic storage and recording truyền thông media, including magnetic disks (for data storage) and magnetic tape (used in audio and đoạn phim recording as well as data storage). Its use in computer disks was superseded by cobalt alloy, enabling thinner magnetic films with higher storage mật độ trùng lặp từ khóa.[23]

Photocatalysis Edit

α-Fe2O3 has been studied as a photoanode for solar water oxidation.[24] However, its efficacy is limited by a short diffusion length (2–4 nm) of photo-excited charge carriers[25] and subsequent fast recombination, requiring a large overpotential to tướng drive the reaction.[26] Research has been focused on improving the water oxidation performance of Fe2O3 using nanostructuring,[24] surface functionalization,[27] or by employing alternate crystal phases such as β-Fe2O3.[28]

Medicine Edit

Calamine lotion, used to tướng treat mild itchiness, is chiefly composed of a combination of zinc oxide, acting as astringent, and about 0.5% iron(III) oxide, the product's active ingredient, acting as antipruritic. The red color of iron(III) oxide is also mainly responsible for the lotion's pink color.

See also Edit

  • Chalcanthum

References Edit

  1. ^ a b c d Haynes, p. 4.69
  2. ^ "A dictionary of chemical solubilities, inorganic". archive.org. Retrieved 17 November 2020.
  3. ^ a b c Comey, Arthur Messinger; Hahn, Dorothy A. (February 1921). A Dictionary of Chemical Solubilities: Inorganic (2nd ed.). New York: The MacMillan Company. p. 433.
  4. ^ Haynes, p. 4.141
  5. ^ a b c d Ling, Yichuan; Wheeler, Damon A.; Zhang, Jin Zhong; Li, Yat (2013). Zhai, Tianyou; Yao, Jiannian (eds.). One-Dimensional Nanostructures: Principles and Applications. Hoboken, New Jersey: John Wiley & Sons, Inc. p. 167. ISBN 978-1-118-07191-5.
  6. ^ a b c d Vujtek, Milan; Zboril, Radek; Kubinek, Roman; Mashlan, Miroslav. "Ultrafine Particles of Iron(III) Oxides by View of AFM – Novel Route for Study of Polymorphism in Nano-world" (PDF). Univerzity Palackého. Retrieved 12 July 2014.
  7. ^ a b c d e Haynes, p. 5.12
  8. ^ a b c Sigma-Aldrich Co., Iron(III) oxide. Retrieved on 2014-07-12.
  9. ^ a b c NIOSH Pocket Guide to tướng Chemical Hazards. "#0344". National Institute for Occupational Safety and Health (NIOSH).
  10. ^ a b "SDS of Iron(III) oxide" (PDF). KJLC. England: Kurt J Lesker Company Ltd. 5 January 2012. Retrieved 12 July 2014.
  11. ^ PubChem. "Iron oxide (Fe2O3), hydrate". pubchem.ncbi.nlm.nih.gov. Retrieved 11 November 2020.
  12. ^ Greedan, J. E. (1994). "Magnetic oxides". In King, R. Bruce (ed.). Encyclopedia of Inorganic chemistry. New York: John Wiley & Sons. ISBN 978-0-471-93620-6.
  13. ^ a b c Housecroft, Catherine E.; Sharpe, Alan G. (2008). "Chapter 22: d-block metal chemistry: the first row elements". Inorganic Chemistry (3rd ed.). Pearson. p. 716. ISBN 978-0-13-175553-6.
  14. ^ "Mechanism of Oxidation & Thermal Decomposition of Iron Sulphides" (PDF).
  15. ^ Tokoro, Hiroko; Namai, Asuka; Ohkoshi, Shin-Ichi (2021). "Advances in magnetic films of epsilon-iron oxide toward next-generation high-density recording media". Dalton Transactions. Royal Society of Chemistry. 50 (2): 452–459. doi:10.1039/D0DT03460F. PMID 33393552. S2CID 230482821. Retrieved 25 January 2021.
  16. ^ Dejoie, Catherine; Sciau, Philippe; Li, Weidong; Noé, Laure; Mehta, Apurva; Chen, Kai; Luo, Hongjie; Kunz, Martin; Tamura, Nobumichi; Liu, Zhi (2015). "Learning from the past: Rare ε-Fe2O3 in the ancient black-glazed Jian (Tenmoku) wares". Scientific Reports. 4: 4941. doi:10.1038/srep04941. PMC 4018809. PMID 24820819.
  17. ^ Shi, Caijuan; Alderman, Oliver; Tamalonis, Anthony; Weber, Richard; You, Jinglin; Benmore, Chris (2020). "Redox-structure dependence of molten iron oxides". Communications Materials. 1 (1): 80. Bibcode:2020CoMat...1...80S. doi:10.1038/s43246-020-00080-4.
  18. ^ Adlam; Price (1945). Higher School Certificate Inorganic Chemistry. Leslie Slater Price.
  19. ^ a b c Handbook of Preparative Inorganic Chemistry, 2nd Ed. Edited by G. Brauer, Academic Press, 1963, NY. Vol. 1. p. 1661.
  20. ^ a b Greenwood, N. N.; Earnshaw, A. (1997). Chemistry of the Element (2nd ed.). Oxford: Butterworth-Heinemann. ISBN 978-0-7506-3365-9.
  21. ^ Paint and Surface Coatings: Theory and Practice. William Andrew Inc. 1999. ISBN 978-1-884207-73-0.
  22. ^ Banerjee, Avijit (2011). Pickard's Manual of Operative Dentistry. United States: Oxford University Press Inc., Thủ đô New York. p. 89. ISBN 978-0-19-957915-0.
  23. ^ Piramanayagam, S. N. (2007). "Perpendicular recording truyền thông media for hard disk drives". Journal of Applied Physics. 102 (1): 011301–011301–22. Bibcode:2007JAP...102a1301P. doi:10.1063/1.2750414.
  24. ^ a b Kay, A., Cesar, I. and Grätzel, M. (2006). "New Benchmark for Water Photooxidation by Nanostructured α-Fe2O3 Films". Journal of the American Chemical Society. 128 (49): 15714–15721. doi:10.1021/ja064380l. PMID 17147381.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  25. ^ Kennedy, J.H. and Frese, K.W. (1978). "Photooxidation of Water at α-Fe2O3 Electrodes". Journal of the Electrochemical Society. 125 (5): 709. Bibcode:1978JElS..125..709K. doi:10.1149/1.2131532.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  26. ^ Le Formal, F. (2014). "Back Electron–Hole Recombination in Hematite Photoanodes for Water Splitting". Journal of the American Chemical Society. 136 (6): 2564–2574. doi:10.1021/ja412058x. PMID 24437340.
  27. ^ Zhong, D.K. and Gamelin, D.R. (2010). "Photoelectrochemical Water Oxidation by Cobalt Catalyst ("Co−Pi")/α-Fe2O3 Composite Photoanodes: Oxygen Evolution and Resolution of a Kinetic Bottleneck". Journal of the American Chemical Society. 132 (12): 4202–4207. doi:10.1021/ja908730h. PMID 20201513.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  28. ^ Emery, J.D. (2014). "Atomic Layer Deposition of Metastable β-Fe2O3 via Isomorphic Epitaxy for Photoassisted Water Oxidation". ACS Applied Materials & Interfaces. 6 (24): 21894–21900. doi:10.1021/am507065y. OSTI 1355777. PMID 25490778.

External links Edit

  • NIOSH Pocket Guide to tướng Chemical Hazards